Manual de instruções Sony ZS-RS09CP

Sony ZS-RS09CP
(1)
  • Número de páginas: 2
  • Tipo de arquivo: PDF
  • ©2011 Sony Corporation Printed in ChinaMain unit
    * VOLUME + and on the
    unit, and VOL + and 5 on the remote have a tactile dot.Remote control

    WARNING

    4-274-412-11(1)Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only.To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.Notice for customers: the following information is only applicable to equipment sold in countries applying EU directivesThe manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
    Notes on DualDiscs
    A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.
    Music discs encoded with
    copyright protection technologies
    This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.This product contains technology subject to certain intellectual property rights of Microsoft.Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.CD player sectionSystemCompact disc digital audio systemLaser diode propertiesEmission duration: ContinuousLaser output: Less than 44.6 µW(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.)Number of channels
    2
    Frequency response20 Hz - 20,000 Hz +1/–2 dBWow and flutter Below measurable limitRadio sectionFrequency rangeFM: 87.5 MHz - 108 MHzAM: 531 kHz - 1,602 kHz
    IF
    FM: 128 kHzAM: 45 kHzAntennasFM: Telescopic antennaAM: Built-in ferrite bar antennaUSB sectionSupported bit rateMP3 (MPEG 1 Audio Layer-3):32 kbps - 320 kbps, VBR
    WMA:
    16 kbps - 320 kbps, VBRSampling frequenciesMP3 (MPEG 1 Audio Layer-3):32/44.1/48 kHz
    WMA:
    32/44.1/48kHz
    (USB) portUSB-A (Full Speed)GeneralSpeakerFull range: 8 cm (3
    1
    /
    4
    in) dia., 4 , cone type (2)InputAUDIO IN Jack (stereo minijack)
    (USB) port: Type A, maximum current 500 mAOutputsHeadphones jack (stereo minijack)For 16 - 32 impedance headphonesPower output1.7 W + 1.7 W (at 4 , 10% harmonic distortion)Power requirementsFor player:230 V AC, 50 Hz9 V DC, 6 R14 (size C) batteriesFor remote control: 3 V DC, 2 R03 (size AAA) batteriesPower consumptionAC 13 WBattery lifeFor player:FM reception Sony R14P: approx. 15 h Sony alkaline LR14: approx. 25 hCD playback Sony R14P: approx. 1.5 hSony alkaline LR14: approx. 9 hDimensionsApprox. 365 mm × 134 mm × 230 mm (w/h/d)
    (14
    3
    /
    8
    inches × 5
    3
    /
    8
    inches × 9
    1
    /
    8
    inches) (incl. projecting parts)
    Mass
    Approx. 2.8 kg (6 lb 2.8 oz) (incl. batteries)Supplied accessoriesAC power cord (1)Remote control (1)Design and specifications are subject to change without notice.Optional accessoriesSony MDR headphones series

    Basic Operations

    Before using the unit

    To turn on/off the powerPress OPERATE
    .
    To adjust the volumePress VOLUME +, –
    (VOL +, – on the remote
    ).
    The volume level of this unit is adjustable from 0 to 31 steps. In the case of the 31st step, “VOL MAX” is displayed.To listen through headphonesConnect headphones to the (headphones) jack
    .
    To use the direct power-on functionPress USB, CD, RADIO/BAND, and AUDIO IN
    on
    the unit. The power turns on directly.To reinforce the bass soundPress MEGA BASS
    on the unit.“MEGA BASS” appears in the display.To return to normal sound, press the button again.

    Playing a CD/MP3/WMA disc

    1 Press OPERATE
    .
    2 Press CD
    on the unit.(On the remote, press FUNCTION
    repeatedly until “CD” appears in the display.)3 Press PUSH OPEN/CLOSE
    on the unit, and place a disc with the label side up on the CD compartment.To close the CD compartment, press PUSH OPEN/CLOSE
    on the unit.4 Press
    on the unit (
    on the remote).The unit plays all the tracks/MP3/WMA files once.When you place MP3/WMA discs, “MP3” or “WMA” appears in the display after the unit reads the file information.Audio CDTrack number Playing timeMP3/WMA disc (Example: When you insert an MP3 disc)MP3/WMA file numberAfter the folder name* and song title are displayed, the file number and playing time** will appear.* If there is no song title in ID3 tag information, file name will be displayed.** If the playing time is more than 100 minutes, it appears as “--:--” in the display.To PressPause playback
    on the unit (
    on the remote). To resume play, press it again.Stop playback
    .Go to the next track/MP3/WMA
    file
    .Go back to the previous track/MP3/WMA file
    .Select a track directly (remote only)Number buttons on the remote of the track you want to listen to. To enter your selection, press ENTER on the remote.(Example: When you select 12 track, press 1, 2 , and then ENTER .)Select a folder on an MP3/WMA
    disc
    “ ” (Folder) + to go forward and “ ” (Folder) – to go backward on the unit (FOLDER +, – on the remote).Locate a point while listening to the sound
    (forward) or
    (backward) during playback, and hold it until you find the point.Locate a point while observing the display
    (forward) or
    (backward) in pause and hold it until you find the point.Remove the CD PUSH OPEN/CLOSE on the unit.
    Tips
    Playback starts from the track/MP3/WMA file you last stopped playing (Resume play). During stop, the track/MP3/WMA file number to be played is displayed.
    To cancel the resume play (to start play from the beginning of the first track/MP3/WMA file), press
    while the CD is stopped. If you open the CD compartment or turn off the unit, resume play will also be canceled.To improve radio reception
    Reorient the antenna to improve FM reception.
    Reorient the unit itself to improve AM reception.
    Note
    Radio sound cannot be recorded by using a USB device.

    Listening to music on a USB

    device

    You can listen to music stored on a USB device (a digital music player or USB storage media).Music files in WMA and MP3 format* can be played on this unit.See “Playable/Recordable USB devices” on the back page for a list of USB devices that can be connected to this unit.* Files with copyright protection (Digital Rights Management) cannot be played on this unit.1 Press OPERATE
    .
    2 Press USB
    on the unit.(On the remote, press FUNCTION
    repeatedly until “USB” appears in the display.)3 Connect the USB device to the
    (USB) port
    .
    When the device’s internal partition is unnamed“USB MEMORY” appears and “STORAGE DRIVE” scrolls once in the display, then “xxxFLDR”* appears in the display.When the device’s internal partition is named“USB MEMORY” appears and the volume label** scrolls once in the display, then “xxxFLDR”* appears in the display.* “xxx” is the total folder number.** A volume label is a name that you can assign to data storage media or devices.4 Press
    on the unit (
    on the remote).The unit starts playing.File number After the folder name and song title are displayed, the file number and playing time* will appear.* If the playing time is more than 100 minutes, it appears as “--:--” in the display.Other operationsTo PressPause playback
    on the unit (
    on the remote). To resume play, press the button again*.Stop playback
    .Select a folder “ ” (Folder) + or – on the unit (FOLDER +, – on the remote).Select a file
    or
    . Select the file directly (remote only)Number buttons on the remote of the track number you want to listen to. To enter your selection, press ENTER on the remote.(Example: When you select 12 track, press 1, 2 , and then ENTER .)Find a point in a
    file
    Hold down
    or
    during playback, and release the button at the desired point.Remove a USB deviceHold down
    until “NO DEVICE” scrolls once in the display, then remove the USB device.* When playing a VBR MP3 file, the unit may resume playback from a different point.
    Tips
    Playback starts from the MP3/WMA file you last stopped playing (Resume play). During stop, the MP3/WMA file number and playing time are displayed.
    To cancel resume play (start play from the beginning of the first MP3/WMA file), press
    .
    Note
    Always hold down
    and make sure that “NO DEVICE” scrolls before removing the USB device. Removing the USB device while “NO DEVICE” is not displayed may corrupt the data on the USB device or damage the USB device itself.To change the play modePress MODE
    repeatedly while the USB device is not playing or paused. You can select Normal Play (“ ” for all files in folder on USB device), Repeat Play (“ 1” or “ ”), Shuffle Play (“SHUF”) or Program Play (“PGM” or “PGM ”) (see “Selecting the various modes of playback” on the back page).Notes on the USB device
    You cannot change the play mode while the USB device is playing or paused.
    It may take a long time before playback starts when:– the folder structure is complex.– the USB device is close to capacity.
    When a USB device is connected, the unit reads all the files on the device. If there are many folders or files on the device, it may take a long time for the unit to finish reading them.
    Do not connect a USB device to the unit through a USB hub.
    In the case of some USB devices, when an operation is performed on the USB device, there may be a delay before it is carried out on this unit.
    This unit may not support all the functions provided on a connected USB device.
    Files recorded by this unit are played back in the order of folder creation. Files recorded by a device other than this unit (such as a computer) may not play back in the order in which they were recorded.
    The playback order on this unit may differ from the playback order on a connected USB device.
    Do not save non-MP3/WMA files or unnecessary folders to a USB device that contains MP3/WMA files.
    During playback, folders that contain no MP3/WMA files are skipped.
    This unit can play only MP3/WMA files that have the “.mp3” or “.wma” file extension.
    If there are files on the disc that have the “.mp3” or “.wma” file extension, but are not MP3/WMA files, the unit may produce noise or malfunction.
    A maximum of 5,000 MP3/WMA files and 255 folders can be contained on a single USB device. A maximum of 999 files can be contained in a single folder. The maximum number of MP3/WMA files and folders may vary, depending on the file and folder structure. The maximum number of directory levels is 8.
    Compatibility with all MP3/WMA encoding/writing software, recording devices, and recording media cannot be guaranteed. If you use an incompatible USB device, sound skipping or noise may be result, or the device may not play at all.

    Specifications

    Notes
    You cannot locate a specific track if “SHUF” or “PGM” is lit in the display. Press
    , and then press MODE
    repeatedly until “SHUF” and “PGM” disappear from the display.
    When using resume play with the CD function, playback resumes from the beginning of the track.To change the play modePress MODE
    repeatedly while the CD is not playing or paused. You can select Normal Play, Repeat Play (“ 1” or “ ”), Shuffle Play (“SHUF”) or Program Play (“PGM” or “PGM ”) (see “Selecting the various modes of playback” on the back page).Example of folder structure and playing orderThe playback order of folders and files is as follows:FolderMP3/WMA fileNotes on MP3/WMA discs
    When the disc is inserted, the unit reads all the files on that disc. During this time, “READING” is displayed. If there are many folders or non-MP3/WMA files on the disc, it may take a long time for playback to begin, or for the next MP3/WMA file to start playing. We recommend that you do not save unnecessary folders or files other than MP3/WMA ones in the disc to be used for MP3/WMA listening.
    A folder that does not include an MP3/WMA file is skipped.
    Maximum number of files: 511 Maximum number of folders: 511 (including the root folder) Maximum directory levels: 8
    Folder names and file names can be displayed with up to 32 characters including quotation marks.
    The characters A - Z, 0 - 9, and _ can be displayed on this unit. Other characters are displayed as “_”.
    This unit conforms to Version 1.0, 1.1, 2.2, 2.3 and 2.4 of the ID3 tag format. When a file has ID3 tag information, “song title”, “artist name” and “album name” can be displayed. If a file does not have the ID3 tag information, its file name appears instead of the song title, “NO ARTIST” appears instead of the artist name and “NO ALBUM” appears instead of the album name. ID3 tag information can be displayed with up to 32 characters.
    When naming, be sure to add the file extension “.mp3” or “.wma” to the file name.
    If you put the extension “.mp3” or “.wma” to a file other than an MP3/WMA file, the unit cannot recognize the file properly and will generate random noise that could damage your speakers.
    The file name does not correspond to the ID3 tag.

    Listening to the radio

    1 Press OPERATE
    .
    2 Press RADIO/BAND AUTO PRESET
    on
    the unit (BAND
    on the remote) repeatedly.Each time you press the button, the indication changes as follows:“FM” “AM”3 Hold down TUNE + or –
    on the unit until the frequency digits begin to change in the display.
    The unit automatically scans the radio frequencies and stops when it finds a clear station.If you cannot tune in a station, press TUNE + or –
    on the unit repeatedly to change the frequency step by step.When an FM stereo broadcast is received, “ST” appears.
    Tip
    If the FM broadcast is noisy, press MODE
    until “MONO” appears in the display and the radio will play in monaural.

    Personal Audio System

    To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.Excessive sound pressure from earphones and headphones can cause hearing loss.The nameplate and important information concerning safety are located on the bottom exterior.Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.Applicable accessories: Remote control

    Power sources

    2 to a wall outlet1 to AC IN
    AC power cord (supplied)
    Connect the AC power cord , or insert six R14 (size C) batteries (not supplied) into the battery compartment .
    Notes
    Replace the batteries when the OPR/BATT indicator
    dims, or when the unit becomes inoperable.
    Replace all the batteries with new ones. Before you replace the batteries, be sure to remove any CD and disconnect any USB
    device from the unit.
    To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.
    When you operate the unit on batteries, you cannot turn on the unit using the remote.Preparing the remoteInsert two R03 (size AAA) batteries (not supplied).Replacing batteries
    With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all
    the batteries with new ones.To use the power-management functionIf no operation is performed for more than 30 minutes in CD, USB and AUDIO IN mode, the unit will enter stand-by mode automatically. To switch the stand-by mode on/off, press DISPLAY/ENTER
    and
    at the same time. 2 minutes before entering stand-by mode, information in the display flashes. In stand-by mode, with the AC power cord connected, “STANDBY” appears in the display.
    Operating Instructions
    ZS-RS09CP

    Recording from a disc to a USB

    device

    By connecting a USB device (digital music player or USB storage media) to the
    (USB) port
    on the unit, you can record music from a disc to the USB device.This unit supports recording from CD-DA and MP3/WMA discs only. Sound from this unit’s optional component (e.g., portable digital music player) or radio cannot be recorded to a USB device.Audio files are recorded on this unit in the MP3 or WMA format.The approximate recording size is about 1 MB per minute of recording time from a CD. The file size may be larger for recordings made from an MP3/WMA disc.See “Playable/Recordable USB devices”, later in this manual for a list of the USB devices that can be connected to this unit.Synchro Recording This function allows you to easily record an entire disc onto a USB device.1 Connect a USB device with recording capability to the
    (USB) port
    .
    If a USB cable is necessary, use the USB cable supplied with the device to be connected.Refer to the operation manual supplied with the USB device for connection details.2 Press PUSH OPEN/CLOSE
    on the unit, and place a disc that you want to record.3 When the CD player is stopped, press MODE
    repeatedly to select the play mode.The play mode automatically changes to Normal Play if the unit is in Shuffle Play, Repeat Play or Program Play (with no tracks or MP3/WMA files programmed) at the start of recording.In the case of Resume play (playback starts from CD-DA disc or the MP3/WMA file you last stopped playing), recording starts from the track you last stopped playing.For details about play modes, see “To change the play mode” in “Listening to music on a USB device”.4 Press REC CD
    USB
    on the unit.“REC” flashes and the display cycles through as follows*:When there is enough space:“CD SYNC” “MEMORY” “PUSH ENT” “FREExxxM”**When there is not enough space:“CD SYNC” “MEMORY” “PUSH ENT” “LOW xxxM”***The USB device changes to recording stand-by and the unit to play pause.* Calculation may take time depending on the size of the files on the USB device. While the amount of free space is being calculated, the display cycles through as follows: “CD SYNC” “PUSH ENT”** If the amount of free space is in the gigabyte range, “FREExxxG” will be displayed as the unit. “FREExxxM”/“FREExxxG” is the remaining storage space on the device, in megabytes/gigabytes.*** When “LOW xxxM” appears in the display, recording may be abruptly cut off. Before this occurs, press
    to cancel recording at the desired point.5 Press ENTER
    on the unit.Recording starts. The unit and the USB device automatically stop when the recording is completed.To record per folder from an MP3/WMA disc1 While the CD is stopped, press MODE
    until “ ” appears in the display to select “ ” (Selected folder play) mode.(On the remote, while the CD is stopped, press MODE
    repeatedly until “ ” appears in the display to select “ ” (Selected folder play) mode.) 2 Press “ ” (Folder) + or –
    on the unit (FOLDER +, –
    on the remote) repeatedly to select a folder.Main unit Remote control3 Press REC CD
    USB
    on the unit.4 Press ENTER
    on the unit.REC1 Recording (single track recording)This procedure allows you to easily record the currently playing track or MP3/WMA file to a USB device.1 Connect a USB device with recording capability to the
    (USB) port
    .
    2 Press PUSH OPEN/CLOSE
    on the unit, and place a disc with the track(s) or MP3/WMA file(s) that you want to record.3 Select the track or MP3/WMA file and start playing it.4 Press REC CD
    USB
    on the unit while the selected track or MP3/WMA file is playing. “REC” flashes and the display cycles through as follows*:When there is enough space:“REC1” “MEMORY” “PUSH ENT” “FREExxxM”**When there is not enough space:“REC1” “MEMORY” “PUSH ENT” “LOW xxxM”***The USB device changes to recording stand-by and the unit to play pause.* Calculation may take time depending on the size of the files on the USB device. While the amount of free space is being calculated, the display cycles through as follows: “REC1” “PUSH ENT”** If the amount of free space is in the gigabyte range, “FREExxxG” will be displayed as the unit. “FREExxxM”/“FREExxxG” is the remaining storage space on the device, in megabytes/gigabytes.*** When “LOW xxxM” appears in the display, recording may be abruptly cut off. Before this occurs, press
    to cancel recording at the desired point.5 Press ENTER
    on the unit.Recording starts. When recording is completed, the CD player continues to play.To stop recordingPress
    .
    To remove the USB device1 Press USB
    on the unit after it has stopped playing.2 Hold down
    on the unit for about 4 seconds until “NO DEVICE” scrolls once in the display.3 Remove the USB device.To erase MP3/WMA files or folders on a USB device You can erase MP3/WMA files or folders that are on a USB device.1 Connect a USB device with recording capability to the
    (USB) port
    .
    2 Press USB
    on the unit.3 Press “ ” (Folder) + or –
    on the unit (FOLDER +, –
    on the remote) repeatedly to select a folder, or press
    or
    repeatedly to select a MP3/WMA file.Main unit Remote control4 Press ERASE/MEMORY SELECT
    on the unit.“ERASE?” appears on the display.5 Press ENTER
    on the unit.When you erase a track, “TRACK” appears, followed by “ERASE?”When you erase a folder, “FOLDER” appears, followed by “ERASE?”To cancel the erase operation, press
    .
    6 Press ENTER
    on the unit.The selected MP3/WMA file or folder is erased.Press ERASE/MEMORY SELECT
    while the selected track or MP3/WMA file is playing, and the unit enters erase stand-by mode.To select the recording destination on a USB deviceIf a USB device has more than one memory (for example, internal memory and a memory card), you can select which memory to read and then start recording (or playing).1 Connect the USB device to the
    (USB) port
    .
    2 Press USB
    on the unit.3 Press ERASE/MEMORY SELECT
    on the unit, in stop mode.“SELECT?” appears. If an audio file or a folder is selected, “ERASE?” appears instead. Press ERASE/MEMORY SELECT
    on the unit again to select “SELECT?”4 Press ENTER
    on the unit.The name of the memory appears.The displayed name varies depending on the specifications of the USB device.5 Press
    or
    repeatedly to select the memory.Proceed to step 6 if only one memory can be selected.To cancel this operation, press
    .
    6 Press ENTER
    on the unit.
    7 Start recording by following steps 2 to 5 of
    “Synchro Recording” or “REC1 Recording.”Folder and file generation rules When a recording operation is first performed on a USB device, a “MUSIC” folder is created directly below “ROOT”. Folders and files are generated within the “MUSIC” folder as follows, according to the recording method.Synchro Recording
    1)
    Recording sourceFolder name File nameMP3/WMA Same as the recording source
    2)
    CD-DA “FLDR001”
    3)
    “TRACK001”
    4)
    REC1 recordingRecording sourceFolder name File nameMP3/WMA“REC1”
    5)
    Same as the recording source
    2)
    CD-DA “TRACK001”
    4)
    1)
    In Program Play, the folder name is “FLDRxxx”, and the file name depends on the recording source (CD-DA disc or MP3/WMA disc). For details about play modes, see “To change the play mode” in “Listening to music on a USB device”.
    2)
    A folder name of up to 32 characters can be assigned.
    3)
    Folder names are assigned in sequential order up to a maximum of 255 (including root and MUSIC).
    4)
    File names are assigned in sequential order.
    5)
    A new file is recorded to the “REC1” folder each time REC1 recording is performed.Notes
    Do not remove the USB device during recording or erase operations. Doing so may corrupt the data on the USB device, or damage the USB device itself.
    Do not connect a USB device to the unit through a USB
    hub.
    When recording from a CD, the tracks are recorded as MP3 files at 128 kbps. When recording from an MP3/WMA disc, MP3/WMA files are recorded with the same bit rate as the original MP3/WMA files.
    While recording a source (MP3/WMA disc), no sound is output and “HI-SPEED” appears.
    CD text information is not included in the MP3/WMA files.
    If you cancel a recording before it is completed, an MP3/WMA file is created up to the point the recording was stopped.
    Recording stops automatically if:– the USB device runs out of space during recording.– the number of MP3/WMA files on the USB device reaches the limit that the unit can recognize.
    A maximum of 5,000 MP3/WMA files and 255 folders can be contained on a single USB device (including root and MUSIC). A maximum of 999 files can be contained in a single folder. The maximum number of MP3/WMA files and folders may vary, depending on the MP3/WMA file and folder structure. The maximum number of directory levels is 8.
    You cannot erase MP3/WMA folders during playback or pause.
    If a folder to be erased contains non-MP3/WMA format files or sub folders, these are not erased.
    If a folder or file with the same name as the one you are trying to record already exists on the USB device, a sequential number is added after the name of the newly recorded folder or file to avoid overwriting the existing
    one.
    Radio sound cannot be recorded by using a USB device.
Sony ZS-RS09CP

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o Sony ZS-RS09CP ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Sony ZS-RS09CP responderem adequadamente à sua pergunta.

Veja o manual do Sony ZS-RS09CP aqui, de graça. Este manual está na categoria Leitores / gravadores de CD e foi avaliado por 1 pessoas com uma média de 7.5. Este manual está disponível nos seguintes idiomas: Inglês. Você tem alguma dúvida sobre o Sony ZS-RS09CP ou precisa de ajuda? Faça a sua pergunta aqui

Sony ZS-RS09CP especificações

A comodidade na palma da sua mão, com um telecomando que torna o controlo do seu monitor mais fácil do que nunca.
Geral
Marca Sony
Modelo ZS-RS09CP
Produto Leitor / gravador de CD
EAN 3610170782209, 4905524729757, 5053460402773
Língua Inglês
Tipo de arquivo PDF
Alto-falante
Classificação de Energia RMS 3.4 W
Áudio
Compressão de áudio MP3,WMA
Rádio
Banda FM 87.5 - 108 MHz
Intervalo de banda AM 531 - 1602 kHz
Bandas do Rádio AM,FM
Tipo de sintonizador Analógico
Características
Playback MP3 -
Controlo do volume Digital
Cor do produto Preto
Reflexão de graves Sim
Cassete
Leitor de cassetes Não
Conteúdo da embalagem
Manual do Utilizador Sim
Controlo remoto incluído Sim
Cabos AC
Conectividade
Quantidade de portas USB 2.0 1
Saída de auscultadores 1
Gestão de energia
Consumo de energia (típico) 13 W
Fonte de alimentação AC
Pesos e dimensões
Peso do produto 2400 g
Profundidade 230 mm
Altura 134 mm
Largura 365 mm
Leitor óptico
Tipo de unidades óptica Leitor
Tipos de disco suportados CD
ver mais