Manual de instruções Shure Beta 58A

Shure Beta 58A
  • Número de páginas: 11
  • Tipo de arquivo: PDF

    The Shure BETA 58A is a high-output supercardioid dy-
    namic vocal microphone designed for professional sound re-
    inforcement and project studio recording. It maintains a true
    supercardioid pattern throughout its frequency range. This
    insures high gain before feedback, maximum isolation from
    other sound sources, and minimum off–axis tone coloration.
    The BETA 58A has a shaped frequency response that is
    ideal for close–up vocals. The superb performance of this
    microphone is not affected by rough handling because of its
    rugged construction, proven shock mount system, and hard-
    ened steel mesh grille. Typical applications for the BETA 58A
    include lead vocals, backup vocals and speech.
    S Frequency response tailored for vocals, with brightened
    midrange and bass rolloff to control proximity effect
    S Uniform supercardioid pattern for high gain before
    feedback and superior rejection of off–axis sound
    S Neodymium magnet for high signal–to–noise output
    S Hardened steel mesh grille that resists wear and abuse
    S Advanced pneumatic shock mount system that minimizes
    transmission of mechanical noise and vibration
    S Minimally effected by varying load impedance
    S Legendary Shure quality and reliability
    The BETA 58A is designed for close-up vocals, and can be
    hand held or mounted on a stand. Some of the most common
    applications and placement techniques are listed in the fol-
    lowing table. Keep in mind that microphone technique is
    largely a matter of personal taste—there is no one “correct”
    microphone position.
    Lips less than 15 cm (6 in.) away
    or touching the windscreen, on
    axis to microphone.
    Robust sound, emphasized
    bass, maximum isolation from
    other sources.
    15 to 60 cm (6 in. to 2 ft.) away
    from mouth, just above nose
    20 to 60 cm (8 in. to 2 ft.) away
    from mouth, slightly off to one
    90 cm to 1.8 m (3 to 6 ft.) away.
    Natural sound, reduced bass.
    Natural sound, reduced bass
    and minimal ”s” sounds.
    Thinner, distant sound; notice-
    able levels of ambient noise.
    1. Aim the microphone toward the desired sound source and
    away from unwanted sources. Since supercardioid micro-
    phones such as the BETA 58A have narrow pickup pat-
    terns and can pick up sounds from the rear, this may not
    be obvious or intuitive.
    2. Place the microphone as close as practical to the desired
    sound source. Refer to the table above.
    3. Work close to the microphone for extra bass response.
    4. Use only one microphone to pick up one sound source.
    5. Keep the distance between microphones at least three
    times the distance from each source to its microphone.
    6. Use the fewest number of microphones as is practical.
    7. Place microphones as far as possible from reflective sur-
    8. Add a windscreen when using the microphone outdoors.
    9. Avoid excessive handling to minimize pickup of mechani-
    cal noise and vibration.
    10. Do not cover any part of the grille with your hand.
    Unidirectional microphones such as the BETA 58A progres-
    sively boost bass frequencies by 6 to 10 dB at 100 Hz when
    the microphone is at a distance of about 6 mm (1/4 in.) from
    the sound source. This phenomenon, known as proximity ef-
    fect, can be used to create a warmer, more powerful sound.
    To prevent explosive low frequency sound during close–up
    use, the BETA 58A bass response gradually rolls off. This pro-
    vides greater control and helps the user take advantage of
    proximity effect.

    Model BETA 58A


    User Guide

    27B2796 (BF)
    2002, Shure Incorporated
    Printed in U.S.A.
Shure Beta 58A

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o Shure Beta 58A ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Shure Beta 58A responderem adequadamente à sua pergunta.

Veja o manual do Shure Beta 58A aqui, de graça. Este manual está na categoria Microfones e foi avaliado por 1 pessoas com uma média de 9.1. Este manual está disponível nos seguintes idiomas: Espagnol, Inglês. Você tem alguma dúvida sobre o Shure Beta 58A ou precisa de ajuda? Faça a sua pergunta aqui

Shure Beta 58A especificações

Marca Shure
Modelo Beta 58A
Produto Microfone
EAN 42406054720
Língua Espagnol, Inglês
Tipo de arquivo PDF
Tipo Microfone de palco
Impedância de entrada do microfone 150 Ω
Sensibilidade do microfone -51 dB
Frequência do microfone 50 - 16000 Hz
Tecnologia de conetividade Com fios
Outras características
Conetor XLR
Pesos e dimensões
Peso do microfone 278 g
Cor do produto Cinzento