Manual de instruções Oregon Scientific BAR388HGA

Oregon Scientific BAR388HGA
  • Número de páginas: 2
  • Tipo de arquivo: PDF

Wireless Weather Station with

Temperature / Humidity Display and

Self-Setting Atomic Clock

Model: BAR388HGA

Thank you for selecting this Oregon Scientic
Weather Station with Temperature / Humidity Display and
Self-Setting Atomic Clock (BAR388HGA). This clock is
supplied with a remote sensor (THGR122N) and can
support up to 3 sensors in total (additional sensors sold
NOTE Please keep this manual handy as you use your new
product. It contains practical step-by-step instructions, as
well as technical specications and warnings you should
know about.
2. Weather Forecast Area
3. Outdoor Temperature Area
4. Indoor Temperature Area
5. Clock / Alarm Area
6. ALARM: View alarm status; set alarm
Weather Forecast Area:
Outdoor Temperature Area:
1. Heat index icon
2. Hi / lo temperature alarm
3. Sensor reception icon
4. Sensor battery low
5. Max / min icon
6. Temperature display
7. Ice warning is active
8. Hi / lo humidity alarm
9. Temperature trend
10. Humidity trend
11. Humidity display
Indoor Temperature Area:
1. Indoor sensor icon
2. Max / min icon
3. Temperature display
4. Temperature trend
5. Humidity trend
6. Humidity display
Clock / Alarm Area:
1. Alarm set
2. AM / PM icon
3. Clock signal reception
4. Low battery icon
5. Clock
6. Alarm mode icon
7. Moon phase
1. LCD
2. LED status indicator:
Blinks red during data
1. Wall mount hole
2. RESET hole
3. CHANNEL switch
4. Battery compartment
Insert batteries before rst use, matching the polarity (+
and -). Press RESET after each battery change.
indicates main unit batteries are low.
NOTE Do not use rechargeable batteries. We recommend
that you use alkaline batteries with this product for longer
usage and lithium batteries in temperatures below
The sensor collects temperature readings approx. every
40 seconds and sends them to the main unit. The main
unit can collect data from up to 3 sensors.
To set up the sensor:
1. Remove the screws from the battery door.
2. Insert the batteries, matching the polarity (+ / -).
3. Select a channel. Make sure you use a different channel
for each sensor.
4. Place the sensor near the main unit. Press RESET on
the sensor.
5. Simultaneously press CHANNEL and MEM on the main
unit to initiate signal sending between the sensor and
main unit.
6. Close the battery door and secure the screws.
7. Place the sensor in the desired location using the table
stand or wall mount.
For best results:
Place the sensor out of direct sunlight and moisture.
Do not place the sensor more than 30 m (100 ft) from
the main (indoor) unit.
Position the sensor so that it faces the main (indoor)
unit, minimizing obstructions such as doors, walls, and
Place the sensor in a location with a clear view to the
sky, away from metallic or electronic objects.
Position the sensor close to the main unit during cold
winter months as below-freezing temperatures may
affect battery performance and signal transmission.
The sensor reception icon in the remote sensor area
shows the status.
and “- - . -“
temperature Area)
The sensor cannot be found.
Search for the sensor or check
To search for a sensor:
Simultaneously, press and hold MEM and CHANNEL for
2 seconds.
NOTE If the sensor is still not found, check the batteries,
obstructions, and remote unit location.
This product is designed to synchronize its date and time
automatically once it is within range of the WWVB-60
signal from the atomic clock in Fort Collins, Colorado.
The clock collects the radio signals whenever it is within
3219 km (2000 miles) of a signal.
NOTE Initial reception takes 2-10 minutes for rst set up
or when RESET is pressed. Once complete, the reception
icon will stop blinking. If the signal is weak, it can take up
to 24 hours to get a valid signal.
To enable and force a signal search:
Press and hold
for 2 seconds.
To disable the signal reception:
Press and hold for 2 seconds.
If the clock signal reception is enabled and a signal is being
received the clock does not need to be manually set.
1. Press and hold MODE for 2 seconds.
2. Press
or to change the settings.
3. Press MODE to conrm.
4. The settings order is: US time zone (Pacic (P), Eastern
(E), Central (C) and Mountain (M)) offest, hour, minute,
year, month, day and language.
NOTE The language options are English (E), German (D),
French (F), Italian (I), and Spanish (S).
Press MODE to choose between the clock with seconds
and clock with weekday display modes.
1. Pressure trend
2. Weather forecast
3. Comfort zone
4. Pressure icon
5. Altitude icon
6. Pressure / altitude unit
7. Heat index icon


1. / : Increase / decrease setting; activate /
deactivate clock reception signal
2. MODE: Change settings / display
3. CHANNEL: Switch remote sensor display
4. MEM: View current, maximum and minimum
temperature / humidity
5. PRESSURE: Select pressure unit; set altitude
6. HEAT INDEX: Display heat index
: Change settings or
enable / disable hi or lo temperature / humidity alarm
for channel 1
8. °C / °F: Select temperature unit
9. RESET: Reset unit to default settings
10. Battery compartment
The transmission range may vary depending on many
factors. You may need to experiment with various locations
to get the best results.
Standard Alkaline batteries contain signicant amounts of
water. Because of this they will freeze in low temperatures
of approximately -12°C (10°F). Disposable Lithium
batteries have a much lower threshold for temperature
with an estimated freezing range of below -30°C (-22°F).
Wireless ranges can be impacted by a variety of factors
such as extremely cold temperatures. Extreme cold may
temporarily reduce the effective range between the sensor
and the base station. If the unit's performance fails due to
low temperature, the unit will resume proper functioning
as the temperature rises to within the normal temperature
range (i.e. no permanent damage will occur to the unit due
to low temperatures).
A channel has been found
and sensor signal is being
Main unit is searching
for the sensor(s)
Clock signal reception indicator:
BAR388HGA_M_R5 2006.4.7, 4:35 PM1

Oregon Scientific BAR388HGA

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o Oregon Scientific BAR388HGA ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Oregon Scientific BAR388HGA responderem adequadamente à sua pergunta.

Veja o manual do Oregon Scientific BAR388HGA aqui, de graça. Este manual está na categoria Estações meteorológicas e foi avaliado por 1 pessoas com uma média de 9.4. Este manual está disponível nos seguintes idiomas: Inglês. Você tem alguma dúvida sobre o Oregon Scientific BAR388HGA ou precisa de ajuda? Faça a sua pergunta aqui

Oregon Scientific BAR388HGA especificações

Marca Oregon Scientific
Modelo BAR388HGA
Produto Estação meteorológica
Língua Inglês
Tipo de arquivo PDF
Funções de medição Termómetro de exterior
Visor de tendência das funções de medição Termómetro
Funcionalidade relógio Sim
Função alarme Sim
Dados extremos da estação meteorológica Termómetro
Previsão do tempo -
Faixa de medição de humidade (exterior) (H-H) 25 - 95
Faixa de medição de temperatura (interior) (T-T) -5 - 50 °C
Faixa de medição de temperatura (interior) (T-T) 23 - 122 °F
Faixa de medição de temperatura (exterior) (T-T) -30 - 60 °C
Faixa de medição de temperatura (exterior) (T-T) -22 - 140 °F
Cor do produto Preto
Visor incorporado Sim
Gestão de energia
Tipo de bateria AAA
Voltagem da bateria 1.5 V
Pesos e dimensões
Largura 119 mm
Profundidade 77 mm
Altura 169 mm
Peso 249 g
ver mais

Perguntas Frequentes

Abaixo, encontrará as perguntas mais frequentes sobre Oregon Scientific BAR388HGA .

A sua pergunta não está na lista? Faça a sua pergunta aqui