Manual de instruções Oregon Scientific BAR208S

Oregon Scientific BAR208S
(2)
  • Número de páginas: 2
  • Tipo de arquivo: PDF
Advanced Weather Station with Atomic TimeModel: BAR208HGAUSER MANUAL
EN
OVERVIEWFRONT VIEW (FIG 1)
1. Remote sensor reception indicator
2. Moon phase reading
3. Weather forecast
4. Indoor temperature with temperature trend
5. Clock signal reception indicator
6. MODE: Change settings / display
7. / : Increase / decrease settings; activate / deacti
vate clock reception signal
8. Outdoor temperature with temperature trend
9. Outdoor humidity with humidity trend
10. Weather warning message
11. Indoor humidity with humidity trend
12. Time zone
13. Clock with weekday
14. MEM: View current, maximum and minimum
temperature / humidity
15. LIGHT: Activate backlight for 5 seconds
16. Ice alert LED indicator
BACK VIEW (FIG 2)
6
1
2
3
4
5
7
14
8
9
10
11
13
15
16
12
1. °C / °F: Select temperature unit
2. RESET: Reset unit to default settings
REMOTE SENSOR (FIG 3)
1. LCD display
2. LED status indicator
3. Wall mount hole
4. RESET hole
5. CHANNEL switch
6. Battery compartment
GETTING STARTEDINSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (see FIG 2).
3. Press RESET after each battery change.
LOCATION MEANING
Clock / alarm and Main unit batteries low
Indoor temperature area
Outdoor temperature area Sensor batteries low
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment with a small Philips
screwdriver and insert batteries, matching the polarity.
2. Select a channel then press
RESET.
3. Close the battery door.
4. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not more
than 5 ft and which can shield it from direct sunlight or wet
conditions for an accurate reading.
NOTE Use alkaline batteries for longer usage and consumer
grade lithium batteries in temperatures below freezing.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold + MODE.
The sensor reception icon in the remote sensor area shows
the status:
ICON
DESCRIPTION
Main unit is searching for sensor(s).
A channel has been found.
The sensor cannot be found.
TIP The transmission range may vary depending on many
factors. You may need to experiment with various locations to
get the best results.
1
2
1
2
3
4
5
6
CLOCK CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with WWVB-60 signal, within 3200km (2000
miles) of Fort Collins Colorado.
To enable / disable signal reception:
Press and hold to
enable or to disable signal reception.
NOTE Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal. If signal
reception is unsuccessful, place your unit next to a window,
press and hold to force another signal search.
Clock signal reception indicator:
STRONG SIGNAL WEAK SIGNALNO SIGNAL
MANUALLY SET CLOCK
To set the clock manually, disable the signal reception first.
1. Press and hold
MODE.
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format, hour,
minute, year, calendar mode (day – month / month
– day), month, day and language.
Select the time zone: (P) Pacific, (E) Eastern, (C) Central or
(M) Mountain.
NOTE The language options are English (E), German (D),
French (F), Italian (I), and Spanish (S).
To select display mode:
Press MODE to choose between clock with seconds /
weekday / calendar / moon phase.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius (US- with a 75%
accuracy).
Sunny
Partially Cloudy
Cloudy
Rainy
Snowy
WEATHER WARNING MESSAGE
The weather warning messages provide indications of
probable circumstances that may arise based on the weather
station’s calculations. The meanings for the warnings are
illustrated below:
Warning Meaning
Risk of high temperatures
Risk of fast wind speeds
Risk of a storm
Risk of foggy conditions
Risk of icy conditions
TEMPERATURE AND HUMIDITY
To toggle temperature unit:
Press °C / °F.
To auto-scan between sensors:
Press and hold
+ MEM to display each sensor’s data for
3 seconds.
To end press
.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
ICE WARNING
If the channel 1 sensor falls between 3°C to -2 °C (37°F to
28°F), LED indicator will flash, and will stop flashing once the
Oregon Scientific BAR208S

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o Oregon Scientific BAR208S ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Oregon Scientific BAR208S responderem adequadamente à sua pergunta.

Veja o manual do Oregon Scientific BAR208S aqui, de graça. Este manual está na categoria Estações meteorológicas e foi avaliado por 2 pessoas com uma média de 8.4. Este manual está disponível nos seguintes idiomas: Inglês. Você tem alguma dúvida sobre o Oregon Scientific BAR208S ou precisa de ajuda? Faça a sua pergunta aqui

Oregon Scientific BAR208S especificações

Geral
Marca Oregon Scientific
Modelo BAR208S
Produto Estação meteorológica
Língua Inglês
Tipo de arquivo PDF
Características
Funções de medição Indoor hygrometer,Indoor thermometer,Outdoor hygrometer,Outdoor thermometer
Visor de tendência das funções de medição Hygrometer,Thermometer
Funcionalidade relógio Sim
Função alarme Não
Dados extremos da estação meteorológica Hygrometer,Thermometer
Previsão do tempo Sim
Faixa de medição de humidade (exterior) (H-H) 25 - 95
Faixa de medição de temperatura (exterior) (T-T) -5 - 50 °C
Faixa de medição de temperatura (exterior) (T-T) 23 - 122 °F
Fases da lua Sim
Cor do produto Prateado
Monitores
Visor incorporado Sim
Visor de retroiluminação Sim
Gestão de energia
Tipo de bateria AA
Voltagem da bateria 1.5 V
Pesos e dimensões
Largura 94 mm
Profundidade 51 mm
Altura 182.5 mm
Peso 241 g
ver mais

Perguntas Frequentes

Abaixo, encontrará as perguntas mais frequentes sobre Oregon Scientific BAR208S .

A sua pergunta não está na lista? Faça a sua pergunta aqui