Manual de instruções Oregon Scientific BAR208HGA

Oregon Scientific BAR208HGA
(1)
  • Número de páginas: 2
  • Tipo de arquivo: PDF

Advanced Weather Station

with Atomic Time

Model: BAR208HGA

USER MANUAL

EN
OVERVIEW
FRONT VIEW (FIG 1)
1. Remote sensor reception indicator
2. Moon phase reading
3. Weather forecast
4. Indoor temperature with temperature trend
5. Clock signal reception indicator
6. MODE: Change settings / display
7.
/ : Increase / decrease settings; activate /
deactivate clock reception signal
8. Outdoor temperature with temperature trend
9. Outdoor humidity with humidity trend
10. Weather warning message
11. Indoor humidity with humidity trend
12. Time zone
13. Clock with weekday
14. MEM: View current, maximum and minimum temperature
/ humidity
15. LIGHT: Activate backlight for 5 seconds
16. Ice alert LED indicator
BACK VIEW (FIG 2)
1. °C / °F: Select temperature unit
2. RESET: Reset unit to default settings
REMOTE SENSOR (FIG 3)
1. LCD display
2. LED status indicator
3. Wall mount hole
4. RESET hole
5. CHANNEL switch
6. Battery compartment
GETTING STARTED
INSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (see FIG 2).
3. Press RESET after each battery change.
LOCATION
MEANING
Clock / alarm and Main unit batteries low
Indoor temperature area
Outdoor temperature area Sensor batteries low
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment with a small Philips
screwdriver and insert batteries, matching the polarity.
2. Select a channel then press RESET.
3. Close the battery door.
4.
Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any location
on the exterior of the home at a height of not more than 5 ft
and which can shield it from direct sunlight or wet conditions
for an accurate reading.
NOTE
Use alkaline batteries for longer usage and consumer
grade lithium batteries in temperatures below freezing.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold
+ MODE.
The sensor reception icon in the remote sensor area shows
the status:
ICON
DESCRIPTION
Main unit is searching for sensor(s).
A channel has been found.
The sensor cannot be found.
TIP The transmission range may vary depending on many
factors.
You
may need to experiment with various locations to
get the best results.
1 2
1
2
3
4
5
6
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock automatically
with WWVB-60 signal, within 3200km (2000 miles) of Fort
Collins Colorado.
To enable / disable signal reception:
Press and
hold
to enable or to disable signal
reception.
NOTE Reception takes 2-10 minutes. If the signal is weak,
it can take
up to 24 hours to get a valid signal. If signal
reception is unsuccessful, place your unit next to a window,
press and hold
to force another signal search.
Clock signal reception indicator:
STRONG SIGNAL
WEAK SIGNAL NO SIGNAL
MANUALLY SET CLOCK
To set the clock manually, disable the signal reception first.
1. Press and hold MODE.
2. Press
or to change the settings.
3. Press MODE to confirm.
4. The settings
order is: time zone, 12/24 hr format, hour,
minute, year, calendar mode (day – month / month
– day), month, day and language.
Select the time
zone: (P) Pacific, (E) Eastern, (C) Central or
(M) Mountain.
NOTE The language options are English (E), German (D),
French (F), Italian (I), and Spanish (S).
T
o select display mode:
Press MODE
to choose between clock with seconds /
weekday / calendar / moon phase.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius (US- with a 75%
accuracy).
Sunny
Partially Cloudy
Cloudy
Rainy
Snowy
WEATHER WARNING MESSAGE
The weather warning messages provide indications of
probable circumstances that may arise based on the weather
station’s calculations. The meanings for the warnings are
illustrated below:
Warning
Meaning
Risk of high temperatures
Risk of high wind speeds
Risk of a storm
Risk of foggy conditions
Risk of icy conditions
TEMPERATURE AND HUMIDITY
To toggle temperature unit:
Press °C / °F in battery compartment.
To auto-scan between sensors:
Press and
hold
+ MEM for 3 seconds to display each
sensor’s data.
To end press
.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.

www.OregonScientificStore.com

Oregon Scientific BAR208HGA

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o Oregon Scientific BAR208HGA ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Oregon Scientific BAR208HGA responderem adequadamente à sua pergunta.

Veja o manual do Oregon Scientific BAR208HGA aqui, de graça. Este manual está na categoria Estações meteorológicas e foi avaliado por 1 pessoas com uma média de 7.5. Este manual está disponível nos seguintes idiomas: Inglês. Você tem alguma dúvida sobre o Oregon Scientific BAR208HGA ou precisa de ajuda? Faça a sua pergunta aqui

Oregon Scientific BAR208HGA especificações

Geral
Marca Oregon Scientific
Modelo BAR208HGA
Produto Estação meteorológica
EAN 163120869688, 734811705570, 7348117055708, 882639801445
Língua Inglês
Tipo de arquivo PDF
Características
Funções de medição Indoor thermometer,Outdoor thermometer
Visor de tendência das funções de medição Termómetro
Funcionalidade relógio Sim
Função alarme Sim
Dados extremos da estação meteorológica Termómetro
Previsão do tempo -
Faixa de medição de humidade (exterior) (H-H) 25 - 95
Faixa de medição de temperatura (interior) (T-T) -5 - 50 °C
Faixa de medição de temperatura (interior) (T-T) 23 - 122 °F
Faixa de medição de temperatura (exterior) (T-T) -20 - 60 °C
Faixa de medição de temperatura (exterior) (T-T) -4 - 140 °F
Cor do produto Branco
Monitores
Visor incorporado Sim
Gestão de energia
Tipo de bateria AAA
Voltagem da bateria 1.5 V
Pesos e dimensões
Largura 94 mm
Profundidade 51 mm
Altura 182.5 mm
Peso 241 g
ver mais

Perguntas Frequentes

Abaixo, encontrará as perguntas mais frequentes sobre Oregon Scientific BAR208HGA .

A sua pergunta não está na lista? Faça a sua pergunta aqui