Manual de instruções EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138

EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138
(1)
  • Número de páginas: 1
  • Tipo de arquivo: PDF
All disclosures, notices and warranty conditions are being written on EKWB web page. Please check terms of use. Released on 9
th
of September, 2011.
Installation manual for EK-VGA Supreme HF HD7970 Cu Adapter
for use with EK-VGA Supreme HFEasy Mount” mounting system
This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no liability
whatsoever, expressed or implied, for the use of these products, nor their installation. The following instructions are subject to change without notice. Please visit our web site at www.ekwaterblocks.com for updates. Before
installation of this product please read important notice, disclosure and warranty conditions printed on the back of the box.
The barb hose fittings require only a small amount of force to screw them in; otherwise the high flow fittings might break. These fittings do not need to be tightened with much force because the
liquid seal is made using o-rings. EK recommends only market tested premixed coolants with anticorrosion additive and algaecide for your liquid cooling system.
STEP 1: PREPARING YOUR HARDWARE STEP 3: ATTACHING WATERBLOCK
CLEANING THE GPU. Wipe off GPU (by using non–abrasive
cloth or Q-tip). EKWB does not recommend using any liquids for
removing paste.

APPLYING THERMAL COMPOUND.

Apply thermal compound:
lightly coat
AMD Tahiti
series GPU chip with for example Arctic
Cooling MX-2 or MX-4 ™ thermal grease. EKWB recommends
to apply thermal grease in cross form for best performance (see
sample picture).
Apply thermal compound on the top of the copper adapter plate
as well!
Tahiti XT / Pro GPU
e.g. Radeon HD 7970/7950
Please make sure to install the waterblock so the G1/4 threaded inlet/outlet ports are turned away
from the PCI-e connector slot! Only this way you will be able to connect block properly into loop.

REQUIRED TOOLS AND MOUNTING SCREWS:

philips screwdriver thermal grease

!!!VERY IMPORTANT!!!

Tahiti XT/PRO GPU:

Use enclosed 0.5mm PVC
washers. Do not use POM
standoffs!
Thumb nut is to be fastened
by hand. Please use enclosed
allen key only if necessary.
Once thumb nut can't be
turned any more the
maximum mounting force has
been reached.
If the mounting screw
eventually starts turning
maximum force has been
reached.
M2.5x6 screws
Polyamid washers
Mounting
screw
Thumb nut
EK-VGA Supreme
HF HD7970 Cu
Adapter
EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138 ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138 responderem adequadamente à sua pergunta.

Veja o manual do EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138 aqui, de graça. Este manual está na categoria Ventiladores para PC e foi avaliado por 1 pessoas com uma média de 7.5. Este manual está disponível nos seguintes idiomas: Inglês. Você tem alguma dúvida sobre o EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138 ou precisa de ajuda? Faça a sua pergunta aqui

EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138 especificações

Geral
Marca EK Water Blocks
Modelo 3831109805138 hardware cooling accessory 3831109805138
Produto Ventilador para PC
EAN 3831109805138
Língua Inglês
Tipo de arquivo PDF
Pesos e dimensões
Largura 28.5 mm
Profundidade 0.5 mm
Altura 28.5 mm
Características
Compatibilidade AMD Radeon HD 7970/7950
Material Cobre
ver mais

Perguntas Frequentes

Abaixo, encontrará as perguntas mais frequentes sobre EK Water Blocks 3831109805138 hardware cooling accessory 3831109805138 .

A sua pergunta não está na lista? Faça a sua pergunta aqui