Manual de instruções Cateye Rapid X2 Kinetic TL-LD710K

Cateye Rapid X2 Kinetic TL-LD710K
(1)
  • Número de páginas: 2
  • Tipo de arquivo: PDF
TL-LD710K
Rubber base for Sharp AeroFor posts with a more acute angle, use the rubber base for Sharp Aero. OPTIONAlways charge the product before use.Attach the light securely to the seatpost.Automatic battery-saving function:When the remaining battery power is low, the lighting mode switch starts flashing and the lighting mode changes to flash. The Kinetic function is disabled when the remaining battery power is low. Charge the light as soon as possible.
ENG
Copyright© 2017 CATEYE Co., Ltd.
TLLD710K-171117
5
HOW TO CHARGE
HOW TO USE
1
HOW TO MOUNT
2
3
1
2
1
2
SeatpostClick
Lighting mode switchPress and hold

ON OFF

Low
Approx.
5h
*
High
High
High
Flashing
Approx.
30h
*
Rapid
Approx.
16h
*
* The stated runtime of each mode exclude the Kinetic function, and the
actual runtime may vary when the Kinetic function is enabled.
*
As a reference, when the Kinetic function is enabled 60 times / hour, the
runtime will be approx. 3 hours in Low mode, approx. 7 hours in Flashing
mode, and approx. 5 hours in Rapid mode.
Kinetic function:When deceleration of the bicycle is detected, the light will turn on in the High mode for approximately 2.5 seconds regardless of the lighting mode selected. The light will remain on in the High mode as long as deceleration is detected.
WARNING!!!
• Before your trip, please make sure the light is
securely attached and lights up.
Do not use a damaged rubber band.
Always pay attention to the remaining battery power
by checking the indicator periodically while using.
CAUTION!
• This light detects deceleration through the use of
acceleration sensor. Please note that activation of
the Kinetic function depends on the degree of
deceleration, the light may not react or the
reaction may be delayed.
• Stop your bicycle to operate the switch.
• Keep the light away from children.
• Charging, discharging, and storing in high
temperatures will cause the rechargeable battery
to deteriorate faster. Do not place the light inside
a vehicle or near a heater.
This unit is not totally waterproof. Please wipe
and dry it completely after using in rain.
Otherwise, it may cause failure.
If the light unit or parts become dirty with mud,
etc., clean with a soft cloth which is moistened
with mild soap. Never apply paint thinner, benzine
or alcohol; damage will result.
PRECAUTIONS ON CHARGING
• We recommend using 500+mA (USB2.0) USB
battery charger.
Avoid charging in direct sunlight or in a vehicle
parked under direct sunlight, and make sure to
charge only when the ambient temperature is
between 5 and 40°C (41°F and 104 °F).
• Before charging, be sure that no dust or other
foreign objects attach to the USB plug.
Do not subject the light to vibrations while charging.
When your PC is in sleep state, the unit cannot be
charged.
Once charging is complete, be sure to disconnect
the USB plug.
Charging and lighting times are approximate values,
and will vary by environmental and user conditions.
• If the illumination time is significantly reduced
even after proper charging, the rechargeable
battery may be nearing the end of its service life.
Dispose of the battery as described in “PRECAU-
TIONS ON DISPOSAL”.
STORAGE PRECAUTIONS
Cool and dry storage is recommended.
For long period storage, it is important to charge the
battery 30 minutes every 6 months.
PRECAUTIONS ON DISPOSAL
When disposing of the light unit, remove the
internal rechargeable battery and dispose of it
according to local regulations.
Manual
Before using the light, read this manual thoroughly and keep it for future reference.Light unitUSB cable(MICRO USB)Rubber band (Large/Small)USB cableTo PC or USB battery chargerChargingCharging is completedStandard charging timeApprox.
2 h
(
USB 2.0
)
Switch (Indicator)Rubber band
Cateye Rapid X2 Kinetic TL-LD710K

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o Cateye Rapid X2 Kinetic TL-LD710K ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Cateye Rapid X2 Kinetic TL-LD710K responderem adequadamente à sua pergunta.

Veja o manual do Cateye Rapid X2 Kinetic TL-LD710K aqui, de graça. Este manual está na categoria Lâmpadas para bicicleta e foi avaliado por 1 pessoas com uma média de 7.5. Este manual está disponível nos seguintes idiomas: Inglês. Você tem alguma dúvida sobre o Cateye Rapid X2 Kinetic TL-LD710K ou precisa de ajuda? Faça a sua pergunta aqui

Cateye Rapid X2 Kinetic TL-LD710K especificações

Geral
Marca Cateye
Modelo Rapid X2 Kinetic TL-LD710K
Produto Lâmpada para bicicleta
Língua Inglês
Tipo de arquivo PDF

Perguntas Frequentes

Abaixo, encontrará as perguntas mais frequentes sobre Cateye Rapid X2 Kinetic TL-LD710K .

A sua pergunta não está na lista? Faça a sua pergunta aqui